联系我们
济南一立新材料科技有限公司
联系人:于宗晖
电话:13256152825
地址:山东省济南市高新区创新谷
加速器建大合新产业基地二区3号楼
当前位置:首页>>新闻动态
ISO车辆电子标准
来源: 发布时间:2021-10-23 浏览量:
ISO车辆电子标准(不包括总线和网络通信标准)
| 序号 | 标准代号 | 英文名称 | 中文名称 |
| 1 | ISO 1185:2003 | Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage | 道路车辆——用于牵引车辆和被牵引车辆间的电气连接的连接器——用于24V标称供应电压的车辆的24N型7极连接器 |
| 2 | ISO 1724:2003 | Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage | 道路车辆——用于牵引车辆和被牵引车辆间的电气连接的连接器——用于12V标称供应电压的车辆的12N型7极连接器 |
| 3 | ISO 2575:2004 | Road vehicles -- Symbols for controls, indicators and tell-tales | 道路车辆——控制器和指示器符号 |
| 4 | ISO 3553-1:1987 | Road vehicles -- High-tension connections for ignition coils and distributors -- Part 1: Socket-type | 道路车辆——点火线圈与分电器的高压连接——第1部分:插坐类型. |
| 5 | ISO 3553-2:1997 | Road vehicles -- High-tension connectors for ignition coils and distributors -- Part 2: Plug-types | 道路车辆——点火线圈与分电器的高压连接——第2部分:插头类型 |
| 6 | ISO 3559:1976 | Road vehicles -- Working voltages for lights fitted to motor vehicles and to their trailers | 道路车辆——汽车及其挂车装用灯具的工作电压 |
| 7 | ISO 3731:2003 | Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage | 道路车辆——用于牵引车辆和被牵引车辆间的电气连接的连接器——用于24伏标称供应电压的车辆的电气装置24S型7极连接器(辅助型) |
| 8 | ISO 3732:2003 | Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage | 道路车辆——用于牵引车辆和被牵引车辆间的电气连接的连接器——用于12伏标称供应电压的车辆的电气装置12S型7极连接器(辅助型) |
| 9 | ISO 3808:2002 | Road vehicles -- Unscreened high-voltage ignition cables -- General specifications, test methods and requirements | 道路车辆——无屏蔽高压点火电缆——总体技术条件,试验方法和要求 |
| 10 | ISO 4009:2000 | Commercial vehicles -- Location of electrical and pneumatic connections between towing vehicles and trailers | 商用车——牵引车和挂车间的电气连接位置 |
| 11 | ISO 4024:1992 | Road vehicles -- Ignition coils -- Low-tension cable connections | 道路车辆——点火线圈低压电缆的连接 |
| 12 | ISO 4040:2001 | Road vehicles -- Location of hand controls, indicators and tell-tales in motor vehicles | 道路车辆——汽车手动控制器,指示器和信号装置 |
| 13 | ISO 4082:1981 | Road vehicles -- Motor vehicles -- Flasher units | 道路车辆——汽车——闪光器 |
| 14 | ISO 4091:2003 | Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Definitions, tests and requirements | 道路车辆——用于牵引车辆和被牵引车辆之间的电气连接的连接器——定义、试验和要求 |
| 15 | ISO 4141-1:2005 | Road vehicles -- Multi-core connecting cables -- Part 1: Test methods and requirements for basic performance sheathed cables | 道路车辆——多芯联结电缆——第1部分:基本性能的铠装电缆的试验方法和要求 |
| 16 | ISO 4141-2:2006 | Road vehicles -- Multi-core connecting cables -- Part 2: Test methods and requirements for high performance sheathed cables | 道路车辆——多芯联结电缆——第2部分:高性能铠装电缆的试验方法和要求 |
| 17 | ISO 4141-3:2006 | Road vehicles -- Multi-core connecting cables -- Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables | 道路车辆——多芯联结电缆——第3部分:非屏蔽铠装低压电缆的尺寸,结构和标记 |
| 18 | ISO 4141-4:2001 | Road vehicles -- Multi-core connecting cables -- Part 4: Articulation test method and requirements for coiled cable assemblies | 道路车辆——多芯连接电缆——第4部分:螺旋型电缆总成实验方法和性能要求 |
| 19 | ISO 4148:2004 | Road vehicles -- Special warning lamps -- Dimensions | 道路车辆——特殊警告灯——尺寸 |
| 20 | ISO 4165:2001 | Road vehicles -- Electrical connections -- Double-pole connection | 道路车辆——电气连接——双极连接器 |
| 21 | ISO 4182:1999 | Motor vehicles -- Measurement of variations in dipped-beam headlamp angle as a function of load | 汽车——近光前照灯角度随载荷变化量的测量 |
| 22 | ISO 6469-1:2001 | Electric road vehicles -- Safety specifications -- Part 1: On-board electrical energy storage | 电动道路车辆——安全规范——第1部分:车载电能储存 |
| 23 | ISO 6469-2:2001 | Electric road vehicles -- Safety specifications -- Part 2: Functional safety means and protection against failures | 电动道路车辆——安全规范——第2部分:功能安全方法和失效防护 |
| 24 | ISO 6469-3:2001 | Electric road vehicles -- Safety specifications -- Part 3: Protection of persons against electric hazards | 电动道路车辆——安全规范——第3部分:使人免受电气伤害的保护 |
| 25 | ISO 6518-1:2002 | Road vehicles -- Ignition systems -- Part 1: Vocabulary | 道路车辆——点火系统——第1部分:词汇 |
| 26 | ISO 6518-2:1995 | Road vehicles -- Ignition systems -- Part 2: Electrical performance and function test methods | 道路车辆——点火系统——第2部分:电气特性及功能试验方法 |
| 27 | ISO 6546:2006 | Road vehicles -- Collection of accident data for evaluation of occupant restraint performance | 道路车辆——乘客约束性能评定用事故数据的收集 |
| 28 | ISO 6722:2006 | Road vehicles -- 60 V and 600 V single-core cables -- Dimensions, test methods and requirements | 道路车辆——60V和600V单芯电缆——尺寸试验方法和技术要求 |
| 29 | ISO 6797:1982 | Road vehicles -- Motor vehicles -- Production conformity requirements for flasher units | 道路车辆——汽车——闪光器的生产一致性要求 |
| 30 | ISO 6856:2005 | Road vehicles -- Unscreened high-voltage ignition cable assemblies -- Test methods and general requirements | 道路车辆——无屏蔽高压点火线总成—— 一般要求和试验方法 |
| 31 | ISO 6969:2004 | Road vehicles -- Sound signalling devices -- Tests after mounting on vehicle | 道路车辆——声响信号装置——装车后试验 |
| 32 | ISO 7227:1987 | Road vehicles -- Lighting and light signalling devices -- Vocabulary | 道路车辆——照明和光信号装置——词汇 |
| 33 | ISO 7588-1:1998 | Road vehicles -- Electrical/electronic switching devices -- Part 1: Relays and flashers | 道路车辆——电气/电子开关设备——第1部分:继电器和闪光器 |
| 34 | ISO 7588-2:1998 | Road vehicles -- Electrical/electronic switching devices -- Part 2: Electronic devices | 道路车辆——电气/电子开关设备——第2部分:电子设备 |
| 35 | ISO 7588-3:1998 | Road vehicles -- Electrical/electronic switching devices -- Part 3: Microrelays | 道路车辆——电气/电子开关设备——第3部分:微型继电器 |
| 36 | ISO 7635:2006 | Road vehicles -- Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions -- Test procedures | 道路车辆——汽车气压或气动液压制动系统,包括具有电子控制功能——试验程序 |
| 37 | ISO 7637-1:2002 | Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations | 道路车辆——由传导和耦合引起的电气干扰——第1部分:定义及总体考虑 |
| 38 | ISO 7637-2:2004 | Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only | 道路车辆——由传导和耦合引起的电气干扰——第2部分:仅沿供电线路的瞬时电气传导 |
| 39 | ISO 7637-3:2007 | Road vehicles -- Electrical disturbances from conduction and coupling -- Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines | 道路车辆——由传导和耦合引起的电气干扰——第3部分:通过电容耦合和电感耦合经由电源线以外的线路的瞬间电气传输 |
| 40 | ISO 7638-1:2003 | Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage | 道路车辆——用于牵引车辆和被牵引车辆之间的电气连接的连接器——第1部分:汽车制动和行走系24V供电电压连接器 |
| 41 | ISO 7638-2:2003 | Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage | 道路车辆——用于牵引车辆和被牵引车辆之间的电气连接的连接器——第2部分:汽车制动和行走系12V供电电压连接器 |
| 42 | ISO 7639:1985 | Road vehicles -- Diagnostic systems -- Graphical symbols | 道路车辆——诊断系统——图示符号 |
| 43 | ISO 7736:1984 | Road vehicles -- Car radio for front installation -- Installation space including connections | 道路车辆——前置汽车收音机——包括连接件的部置空间 |
| 44 | ISO 8092-1:1996 | Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 1: Tabs for single-pole connections -- Dimensions and specific requirements | 道路车辆——用于车载电气线束的连接——第1部分:单极连接的接头——尺寸和特殊要求 |
| 45 | ISO 8092-2:2005 | Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 2: Definitions, test methods and general performance requirements | 道路车辆——用于车载电气线束的连接——第2部分:定义,试验方法和一般性能要求 |
| 46 | ISO 8092-3:1996 | Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 3: Tabs for multi-pole connections -- Dimensions and specific requirements | 道路车辆——用于车载电气线束的连接——第3部分:多极连接的接头——尺寸和特殊要求 |
| 47 | ISO 8092-4:1997 | Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 4: Pins for single- and multi-pole connections -- Dimensions and specific requirements | 道路车辆——用于车载电气线束的连接——第4部分:单极和多极连接的插脚——尺寸和特殊要求 |
| 48 | ISO 8093:1985 | Road vehicles -- Diagnostic testing of electronic systems | 道路车辆——电子系统的诊断试验 |
| 49 | ISO 8218:1989 | Road vehicles -- Levelling devices for headlamp dipped beam | 道路车辆——前照灯近光调整装置 |
| 50 | ISO/TR 8725:1988 | Road vehicles -- Transient open-loop response test method with one period of sinusoidal input | 道路车辆——单周正弦输入时瞬态开环响应试验方法 |
| 51 | ISO/TR 8726:1988 | Road vehicles -- Transient open-loop response test method with pseudo-random steering input | 道路车辆——随机转向输入时瞬态开环响应试验方法 |
| 52 | ISO 8820-1:2002 | Road vehicles -- Fuse-links -- Part 1: Definitions and general test requirements | 道路车辆——熔断器——第1部分:定义和一般试验方法 |
| 53 | ISO 8820-2:2005 | Road vehicles -- Fuse-links -- Part 2: User's guide | 道路车辆——熔断器——第2部分:用户手册 |
| 54 | ISO 8820-3:2002 | Road vehicles -- Fuse-links -- Part 3: Fuse-links with tabs (blade type) | 道路车辆——熔断器——第3部分:带接头的熔断器 |
| 55 | ISO 8820-4:2002 | Road vehicles -- Fuse-links -- Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures | 道路车辆——熔断器——第4部分:阴性接触(类型A)、螺栓接触(类型B) 及其试验夹具熔断器 |
| 56 | ISO 8820-5:2007 | Road vehicles -- Fuse-links -- Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures | 道路车辆——熔断器——第5部分:带轴向终端的熔断器 |
| 57 | ISO 8820-6:2007 | Road vehicles -- Fuse-links -- Part 6: Single-bolt fuse-links | 道路车辆——熔断器——第6部分:单极熔断器 |
| 58 | ISO 8820-7:2007 | Road vehicles -- Fuse-links -- Part 7: Fuse-links with tabs (Type G) with rated voltage of 450 V | 道路车辆——熔断器——第7部分:额定电压450V的带接头的熔断器 |
| 59 | ISO 8854:1988 | Road vehicles -- Alternators with regulators -- Test methods and general requirements | 道路车辆——带调节器的交流发电机——试验方法和一般要求 |
| 60 | ISO 9458:1988 | Passenger cars -- Starter motor electrical connections | 乘用车——起动机电气连接 |
| 61 | ISO 9534:1989 | Road vehicles -- Fuel pump electric connections | 道路车辆——燃油泵的电气连接 |
| 62 | ISO 9816:2006 | Passenger cars -- Power-off reaction of a vehicle in a turn -- Open-loop test method | 乘用车——车辆转向时的停机反应——开环试验方法 |
| 63 | ISO/TR 9819:1991 | Road vehicles -- Comparison tables of regulations on photometric requirements of light signalling devices | 道路车辆——光信号装置配光要求法规的比较表 |
| 64 | ISO/TR 10305-1:2003 | Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz | 道路车辆——电磁场场强检测设备——第1 部分:大于0Hz的电磁场的检测设备 |
| 65 | ISO/TR 10305-2:2003 | Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz | 道路车辆——电磁场场强检测设备——第2 部分:从9kHz到40GHz的不包括天线在内的电磁场传感器和探针的校正的IEEE标准 |
| 66 | ISO 10455:1992 | Road vehicles -- Dry ignition coils using rotating high-voltage distributor | 道路车辆——使用旋转高压分电器的干式点火线圈 |
| 67 | ISO 10483-1:2004 | Road vehicles -- Intelligent power switches -- Part 1: High-side intelligent power switch | 道路车辆——智能动力开关——第1部分: 高位智能动力开关 |
| 68 | ISO 10483-2:1996 | Road vehicles -- Intelligent power switches -- Part 2: Low-side intelligent power switch | 道路车辆——智能动力开关——第2部分:低位智能动力开关 |
| 69 | ISO 10486:1992 | Passenger cars -- Car radio identification number (CRIN) | 乘用车——车用收音机识别号码 |
| 70 | ISO 10487-1:1992 | Passenger car radio connections -- Part 1: Dimensions and general requirements | 乘用车收音机的连接——第1部分:尺寸和一般要求 |
| 71 | ISO 10487-2:1995 | Passenger cars -- Connections for car radios -- Part 2: Performance requirements | 乘用车——收音机的连接——第2部分:性能要求 |
| 72 | ISO 10599-1:1992 | Car radios -- Coaxial aerial connectors -- Part 1: Dimensions | 轿车收音机——同轴天线连接器——第1部分: 尺寸 |
| 73 | ISO 10599-2:1997 | Car radios -- Coaxial aerial connectors -- Part 2: Characteristic values, performance requirements and tests | 轿车收音机——同轴天线连接器——第2部分:特性值,性能要求和试验 |
| 74 | ISO 10603:1992 | Road vehicles -- Legal situation concerning lighting and light-signalling devices | 道路车辆——有关灯光及光信号装置的法规情况 |
| 75 | ISO 10604:1993 | Road vehicles -- Measurement equipment for orientation of headlamp luminous beams | 道路车辆——前照灯光束定位测量设备 |
| 76 | ISO 10605:2001 | Road vehicles -- Test methods for electrical disturbances from electrostatic discharge | 道路车辆——静电放电的电骚扰试验方法 |
| 77 | ISO/TR 10982:1998 | Road vehicles -- Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags | 道路车辆——评估偏离预定位置的车辆乘员与展开气囊的相互影响的试验程序 |
| 78 | ISO 11446:2004 | Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 13-pole connectors for vehicles with 12 V nominal supply voltage | 道路车辆——用于牵引车辆和被牵引车辆间的电气连接的连接器——用于12V标称供应电压车辆的13极连接器 |
| 79 | ISO 11451-1:2005 | Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology | 道路车辆——窄频辐射电磁能引发的电气干扰的车辆试验方法——第1部分:总则和术语 |
| 80 | ISO 11451-2:2005 | Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources | 道路车辆——窄频辐射电磁能引发的电气干扰的车辆试验方法——第2 部分:车外辐射源 |
| 81 | ISO 11451-3:2007 | Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulation | 道路车辆——窄频辐射电磁能引发的电气干扰的车辆试验方法——第3部分:车载发射器的模拟 |
| 82 | ISO 11451-4:2006 | Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI) | 道路车辆——窄频辐射电磁能引发的电气干扰的车辆试验方法——第4部分:大电流注入 |
| 83 | ISO 11452-1:2005 | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology | 道路车辆——窄频辐射电磁能引发的电气干扰的部件试验方法——第1部分:总则及术语 |
| 84 | ISO 11452-2:2004 | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure | 道路车辆——窄频辐射电磁能引发的电气干扰的部件试验方法——第2部分:吸波室屏蔽外壳 |
| 85 | ISO 11452-3:2001 | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell | 道路车辆——窄频辐射电磁能引发的电气干扰的部件试验方法——第3部分:横向电磁模式(TEM)元件 |
| 86 | ISO 11452-4:2005 | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI) | 道路车辆——窄频辐射电磁能引发的电气干扰的部件试验方法——第4部分:大容量电流注入(BCI) |
| 87 | ISO 11452-5:2002 | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 5: Stripline | 道路车辆——窄频辐射电磁能引发的电气干扰的部件试验方法——第5部分:带状线 |
| 88 | ISO 11452-7:2003 | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 7: Direct radio frequency (RF) power injection | 道路车辆——窄频辐射电磁能引发的电气干扰的部件试验方法——第7部分:直接射频(RF)功率注入 |
| 89 | ISO 11452-8:2007 | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 8: Immunity to magnetic fields | 道路车辆——窄频辐射电磁能引发的电气干扰的部件试验方法——第8部分:对磁场的抗扰性 |
| 90 | ISO/CD 11452-9 | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 9: Portable transmitters | 道路车辆——窄频辐射电磁能引发的电气干扰的部件试验方法——第9部分:便携式发射机 |
| 91 | ISO/DIS 11452-10 | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 10: Conducted immunity in the extended audio frequency range | 道路车辆——窄频辐射电磁能引发的电气干扰的部件试验方法——第10部分:在音频扩展范围中的传导干扰性 |
| 92 | ISO/CD 11452-11 | Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 11: Radiated immunity test method using a reverberation chamber | 道路车辆——窄频辐射电磁能引发的电气骚扰部件试验方法——第11部分:使用反射室的辐射抗扰性试验方法 |
| 93 | ISO 11565:2006 | Road vehicles -- Spark-plugs -- Test methods and requirements | 道路车辆——火花塞——试验方法及性能要求 |
| 94 | ISO 11614:1999 | Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas | 往复内燃式压燃发动机——测量排气阻光度和光吸收率的仪器 |
| 95 | ISO 11748-1:2001 | Road vehicles -- Technical documentation of electrical and electronic systems -- Part 1: Content of exchanged documents | 道路车辆——电气及电子系统技术文件——第1部分:交换文件内容 |
| 96 | ISO 11748-2:2001 | Road vehicles -- Technical documentation of electrical and electronic systems -- Part 2: Documentation agreement | 道路车辆——电气及电子系统技术文件——第2部分:文件协议 |
| 97 | ISO 11748-3:2002 | Road vehicles -- Technical documentation of electrical and electronic systems -- Part 3: Application example | 道路车辆——电气及电子系统技术文件——第3部分:申请样本 |
| 98 | ISO/TR 11842:1997 | Road vehicles -- Comparison of statutory photometric requirements in various countries for lighting devices | 道路车辆——各国照明设备光度对比 |
| 99 | ISO 12021-1:1996 | Road vehicles -- Sensitivity to lateral wind -- Part 1: Open-loop test method using wind generator input | 道路车辆——对侧向风的敏感度——第1部分: 使用风生成器输入的开环试验方法 |
| 100 | ISO 12097-1:2002 | Road vehicles -- Airbag components -- Part 1: Vocabulary | 道路车辆——气囊部件——第1部分:词汇 |
| 101 | ISO 12097-2:1996 | Road vehicles -- Airbag components -- Part 2: Testing of airbag modules | 道路车辆——气囊部件——第2部分:气囊组件试验方法 |
| 102 | ISO 12097-3:2002 | Road vehicles -- Airbag components -- Part 3: Testing of inflator assemblies | 道路车辆——气囊部件——第3部分:增压泵总成试验 |
| 103 | ISO 12098:2004 | Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 15-pole connector for vehicles with 24 V nominal supply voltage | 道路车辆——用于牵引车辆和被牵引车辆之间的电气连接的连接器——24V标称供电电压15极接头 |
| 104 | ISO/TS 12104:2003 | Road vehicles -- Gearshift patterns -- Manual transmissions with power-assisted gearchange and automatic transmissions with manual-gearshift mode | 道路车辆——变速排档模式——带助力变速杆的手动变速器和带手动变速排档的自动变速箱 |
| 105 | ISO/TR 12155:1994 | Commercial vehicles -- Obstacle detection device during reversing -- Requirements and tests | 商用车辆——倒车过程中的障碍物探测设备——要求和试验 |
| 106 | ISO 12161:2006 | Road vehicles -- Endurance braking systems of motor vehicles and towed vehicles -- Test procedures | 道路车辆——汽车和被牵引车辆的持久刹车系统——试验程序 |
| 107 | ISO 12214:2002 | Road vehicles -- Direction-of-motion stereotypes for automotive hand controls | 道路车辆——汽车手动控制器运动方向模式 |
| 108 | ISO/TR 12343:1997 | Road vehicles -- Symbols for electrotechnical diagrams | 道路车辆——电工技术图示符号 |
| 109 | ISO 13476:1997 | Road vehicles -- Ignition coils -- Electrical characteristics and test methods | 道路车辆——点火线圈——电气特性及试验方法 |
| 110 | ISO/TS 13499:2003 | Road vehicles -- Multimedia data exchange format for impact tests | 道路车辆——碰撞试验多媒体数据交换 |
| 111 | ISO 13948-1:2000 | Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 1: Threaded connections | 柴油机——燃油喷射泵和燃油喷射器低压连接器——第1部分:线束连接 |
| 112 | ISO 13948-2:2000 | Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 2: Non-threaded (push-on) connections | 柴油机——燃油喷射泵和燃油喷射器低压连接器——第2部分:非线束连接 |
| 113 | ISO 14229-1:2006 | Road vehicles -- Unified diagnostic services (UDS) -- Part 1: Specification and requirements | 道路车辆——统一诊断设备服务(UDS)——第1部分:规范和要求 |
| 114 | ISO 14469-1:2004 | Road vehicles -- Compressed natural gas (CNG) refuelling connector -- Part 1: 20 MPa (200 bar) connector | 道路车辆——压缩天然气(CNG)加油连接器——第1部分:20MPa(200 bar)连接器 |
| 115 | ISO/DIS 14469-2.2 | Road vehicles -- Compressed natural gas (CNG) refuelling connector -- Part 2: 20 MPa (200 bar) connector Size 2 | 道路车辆——压缩天然气(CNG)加油连接器——第2部分:20MPa(200 bar)连接器尺寸2 |
| 116 | ISO 14469-3:2006 | Road vehicles -- Compressed natural gas (CNG) refuelling connector -- Part 3: 25 MPa (250 bar) connector | 道路车辆——压缩天然气(CNG)加油连接器——第3部分:25MPa(250 bar)连接器 |
| 117 | ISO 14508:2006 | Road vehicles -- Spark-plugs -- Terminals | 道路车辆——火花塞——接线端子 |
| 118 | ISO 14572:2006 | Road vehicles -- Round, screened and unscreened 60 V and 600 V multi-core sheathed cables -- Test methods and requirements for basic and high-performance cables | 道路车辆——圆形、屏蔽和非屏蔽60V和600V多芯铠装电缆——基本和高性能电缆的试验方法和性能要求 |
| 119 | ISO 14572:2001 | Road vehicles -- Round, unscreened 60 V and 600 V multicore sheathed cables -- Test methods and requirements for basic and high performance cables | 道路车辆——圆形、非屏蔽60V和600V多芯铠装电缆——基本和高性能电缆的试验方法和性能要求 |
| 120 | ISO/TR 14645:1998 | Road vehicles -- Test procedures for evaluating child restraint system interactions with deploying air bags | 道路车辆——评估儿童约束系统与展开气囊的相互作用的试验程序 |
| 121 | ISO 14792:2003 | Road vehicles -- Heavy commercial vehicles and buses -- Steady-state circular tests | 道路车辆——重型车辆——稳态循环试验 |
| 122 | ISO 15005:2002 | Road vehicles -- Ergonomic aspects of transport information and control systems -- Dialogue management principles and compliance procedures | 道路车辆——交通信息和控制系统人体工程学——对话管理准则和符合性规程 |
| 123 | ISO 15006:2004 | Road vehicles -- Ergonomic aspects of transport information and control systems -- Specifications and compliance procedures for in-vehicle auditory presentation | 道路车辆——有关交通信息及控制系统驾驶员可视性——车内听觉信号表示的规范和符合性规程 |
| 124 | ISO 15007-1:2002 | Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 1: Definitions and parameters | 道路车辆——有关交通信息及控制系统驾驶员可视性检测——第1部分:定义和参数 |
| 125 | ISO/TS 15007-2:2001 | Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 2: Equipment and procedures | 道路车辆——有关交通信息及控制系统驾驶员可视性检测——第2部分:设备及规程 |
| 126 | ISO 15008:2003 | Road vehicles -- Ergonomic aspects of transport information and control systems -- Specifications and compliance procedures for in-vehicle visual presentation | 道路车辆——交通信息和控制系统的人类环境学方面——车内可视信号表示的规范和符合性规程 |
| 127 | ISO 15037-1:2006 | Road vehicles -- Vehicle dynamics test methods -- Part 1: General conditions for passenger cars | 道路车辆——车辆动力学试验方法——第1部分:乘用车一般试验条件 |
| 128 | ISO 15037-2:2002 | Road vehicles -- Vehicle dynamics test methods -- Part 2: General conditions for heavy vehicles and buses | 道路车辆——车辆动力学试验方法——第2部分:重型车辆和客车一般情况 |
| 129 | ISO 15170-1:2001 | Road vehicles -- Four-pole electrical connectors with pins and twist lock -- Part 1: Dimensions and classes of application | 道路车辆——带有插销和螺旋锁的四极电气连接器——第1部分:尺寸与应用等级 |
| 130 | ISO 15170-2:2001 | Road vehicles -- Four-pole electrical connectors with pins and twist lock -- Part 2: Tests and requirements | 道路车辆——带有插销和螺旋锁的四极电气连接器——第2部分:试验和性能要求 |
| 131 | ISO 15763:2002 | Road vehicles -- Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t | 道路车辆——最大总质量超过3.5t 的客车和商用车的报警系统 |
| 132 | ISO 15764:2004 | Road vehicles -- Extended data link security | 道路车辆——扩展数据链接安全 |
| 133 | ISO/TS 16553:2006 | Road vehicles -- Data cables -- Test methods and requirements | 道路车辆——数据电缆——试验方法和要求 |
| 134 | ISO 16750-1:2006 | Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 1: General | 道路车辆——电气和电子设备的环境条件和试验——第1部分:总体要求 |
| 135 | ISO 16750-2:2006 | Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 2: Electrical loads | 道路车辆——电气和电子设备的环境条件和试验——第2部分:电气条件 |
| 136 | ISO 16750-3:2007 | Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads | 道路车辆——电气和电子设备的环境条件和试验——第3部分:机械条件 |
| 137 | ISO 16750-4:2006 | Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads | 道路车辆——电气和电子设备的环境条件和试验——第4部分:气候条件 |
| 138 | ISO 16750-5:2003 | Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 5: Chemical loads | 道路车辆——电气和电子设备的环境条件和试验——第5部分:化学条件 |
| 139 | ISO/TS 16951:2004 | Road vehicles -- Ergonomic aspects of transport information and control systems (TICS) -- Procedures for determining priority of on-board messages presented to drivers | 道路车辆——交通信息和控制系统(TICS)人类环境学方面——确定展示给驾驶员的车载信息优先权的规程 |
| 140 | ISO 19072-1:2007 | Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 1: Pocket interface definition | 道路车辆——打火装置的连接接口,两路或三路连接——第1部分:小型接口定义 |
| 141 | ISO 19072-2:2007 | Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 2: Test methods and general performance requirements | 道路车辆——打火装置的连接接口,两路或三路连接——第2部分:试验方法和一般性能要求 |
| 142 | ISO/CD TS 19072-3 | Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 3: Pyrotechnic device and harness connector assembly | 道路车辆——打火装置的连接接口,两路或三路连接——第3部分:打火装置和线束连接器装配 |
| 143 | ISO 19813:2006 | Road vehicles -- Ignition systems -- Test methods and requirements for high voltage boots on plug-top coils and pencil coils | 道路车辆——点火系统——火花塞点火线圈和石墨线圈上高压点火器的要求和试验方法 |
| 144 | ISO 20653:2006 | Road vehicles -- Degrees of protection (IP-Code) -- Protection of electrical equipment against foreign objects, water and access | 道路车辆——防护等级(IP-编码)——电子设备对外来物体、水和通道的防护 |
| 145 | ISO 20828:2006 | Road vehicles -- Security certificate management | 道路车辆——安全证书管理 |
| 146 | ISO/CD 21308-1 | Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 1: General principles | 道路车辆——底盘和车身制造商间的数据交换(BEP)——第1部分:一般规则 |
| 147 | ISO 21308-2:2006 | Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 2: Dimensional bodywork exchange parameters | 道路车辆——底盘和车身制造商间的产品数据交换(BEP)——第2部分:车身尺寸的交换参数 |
| 148 | ISO/PRF 21308-3 | Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 3: General, mass and administrative exchange parameters | 道路车辆——底盘和车身制造商间的产品数据交换(BEP)——第3部分:管理信息 |
| 149 | ISO/CD 21308-4 | Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 4: Mapping to STEP application protocol 239 | 道路车辆——底盘和车身制造商间的产品数据交换(BEP)——第4部分:制定执行程序应用协议 |
| 150 | ISO/TS 21609:2003 | Road vehicles -- (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment | 道路车辆——无线电频率发射设备安装用EMC指南 |
| 151 | ISO 21750:2006 | Road vehicles -- Safety enhancement in conjunction with tyre inflation pressure monitoring | 道路车辆——有关增进轮胎充气压力监控的安全 |
| 152 | ISO 21848:2005 | Road vehicles -- Electrical and electronic equipment for a supply voltage of 42 V -- Electrical loads | 道路车辆——42V供电电压电气和电子设备——电气负载 |
| 153 | ISO 22168:2006 | Road vehicles -- Holding test of coatings influencing the colour of light emitted by light source(s) -- Test methods | 道路车辆——影响来自光源的光色的覆层保持试验——试验方法 |
| 154 | ISO/FDIS 22900-1 | Road vehicles -- Modular vehicle communication interface (MVCI) -- Part 1: Hardware design requirements | 道路车辆——模块化车辆通信接口(MVCI)——第1部分:硬件设计要求 |
| 155 | ISO/DIS 22900-2 | Road vehicles -- Modular vehicle communication interface (MVCI) -- Part 2: Diagnostic protocol data unit application programming interface (D-PDU API) | 道路车辆——模块化车辆通信接口(MVCI)——第2部分:诊断协议数据单元应用程序接口(D-PDU API) |
| 156 | ISO/DIS 22900-3 | Road vehicles -- Modular vehicle communication interface (MVCI) -- Part 3: Diagnostic server application programming interface (D-Server API) | 道路车辆——模块化车辆通信接口(MVCI)——第3部分:诊断服务器应用程序接口(D-Server API) |
| 157 | ISO/AWI 22900-4 | Road vehicles -- Modular vehicle communication interface (MVCI) -- Part 4: Conformance test | 道路车辆——模块化车辆通信接口(MVCI)——第4部分:符合性测试 |
| 158 | ISO/DIS 22901-1 | Road vehicles -- Open diagnostic data exchange -- Part 1: Data model specification | 道路车辆——开放式诊断数据交换——第1部分:数据模型规范 |
| 159 | ISO 23273-1:2006 | Fuel cell road vehicles -- Safety specifications -- Part 1: Vehicle functional safety | 燃料电池道路车辆——安全规范——第1部分:车辆功能安全 |
| 160 | ISO 23273-2:2006 | Fuel cell road vehicles -- Safety specifications -- Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen | 燃料电池道路车辆——安全规范——第2部分:加压缩氢车辆的抗氢危险的防护 |
| 161 | ISO 23273-3:2006 | Fuel cell road vehicles -- Safety specifications -- Part 3: Protection of persons against electric shock | 燃料电池道路车辆——安全规范——第3部分:人员抗电击的防护 |
| 162 | ISO/FDIS 25981 | Road vehicles -- Connectors for the electrical connnection of towing and towed vehicles -- Connectors for charging systems of vehicles with 12 V or 24 V nominal supply voltage | 道路车辆——用于牵引车辆和被牵引车辆间的电气连接的连接器——用于12V或者24V标称供应电压车辆的充电系统的连接器 |
| 163 | ISO/DIS 26021-1 | Road vehicles -- End of life activation on on-board pyrotechnic devices -- Part 1: General Information and use case definition | 道路车辆——车载打火装置寿命激活的结束——第1部分:总信息和应用定义 |
| 164 | ISO/DIS 26021-2 | Road vehicles -- End of life activation on on-board pyrotechnic devices -- Part 2: Communication requirements | 道路车辆——车载打火装置寿命激活的结束——第2部分:通信要求 |
| 165 | ISO/DIS 26021-3 | Road vehicles -- End of life activation on on-board pyrotechnic devices -- Part 3: Test requirements and specification | 道路车辆——车载打火装置寿命激活的结束——第3部分:测试要求和规范 |
| 166 | ISO/DIS 26021-4 | Road vehicles -- End of life activation on on-board pyrotechnic devices -- Part 4: Additional communication line with bidirectional communication | 道路车辆——车载打火装置寿命激活的结束——第4部分:带有双向通信的附加通信线 |
| 167 | ISO/DIS 26021-5 | Road vehicles -- End of life activation on on-board pyrotechnic devices -- Part 5: Additional communication line with pulse width modulated signal | 道路车辆——车载打火装置寿命激活的结束——第5部分:带有脉冲宽度调制信号的附加通信线 |
| 168 | ISO/AWI 26022 | Road vehicles -- Ergonomic aspects of transport information and control systems -- Simulated lane change test to assess driver distraction | 道路车辆——运输信息和控制系统的人类环境学方面——评估驾驶员分心的模拟通道变化试验 |
上一页:TPE包胶不好?让我们从工艺上找原因! :没有了
推荐产品
热门文章
- 2021-10-23TPE汽车密封条比TPV材料好在哪里
- 2021-10-23tpee与tpe材料有什么区别
- 2021-10-23【干货】简单几点分辨出TPE弹性体的主基材
- 2021-10-23【案例】TPE弹性体产生料花,银纹,水花现象分
- 2021-10-23【问答】TPE弹性体发泡率高还是低?
